Dental PAD Photo-Activated Disinfection Medical Light Lamp Laser

Description

Photo-Activated Disinfection Medical Laser Equipment/F3WWPAD Light dental oral laser treatment
1 .INTRODUCTION
1.1 DESCRIPTION
Photo-Activated Disinfection technology is based on two components to selectively tag and destroy cariogenic bacteria and periodontal pathogens:
a solution of dilute, pharmaceutical grade tolonium chloride (a vital stain)
and light of a specific wavelength (650 nm) to activate the solution.
Photo-Activated Disinfection(PAD) Light-F3WW
provide the light of a specific wavelength (650 nm) to activate the solution.
Introduced into dental hard or soft tissue,
the solution of dilute, pharmaceutical grade tolonium chloride (a vital stain)
selectively targets and tags all bacteria. When the solution is activated by the
Photo-Activated Disinfection(PAD) Light-F3WW
,it releases singlet oxygen which ruptures the cell walls of bacteria, killing them in seconds.
1.2 Indications for Use
Photo-Activated Disinfection(PAD) Light-F3WW is equally effective to activate the solution on the bacteria found in root canals, periodontal pockets, periimplantitis,carious teeth,Infection control and pain relief.
Kills all bacteria including:
• Streptococcus mutans
• Total streptococcus
• Streptococcus sobrinus
• Streptococcus intermedius
• Actinomyces
• Lactobacillus
• veilonella
• Prevotella intermedia
• Peptostreptococcus micros
• Fusobacterium nucleatum
• Porphyromonas gingivalis
• Staphaloccoccus aureus
• E.faecalis
2.INSTALLATION
2.1 Product content
The shipping box should contain the following device components:
Description
QTY
PAD Light main body
1
Magnetic rechargeable battery
1
Goggle
2
Light rob
2
Charge station
1
Power Adapter
1
Disposal Tip
20
User Guide
1
2.2 CLEANING AND STERILIZATION BEFORE USE ON PATIENTS
The PAD Light and accessories are provided non-sterile. Cleaning and sterilization of accessories and components that come in contact with open tissue is required prior to use on patients.
2.3 Safety
Do not stare into the visible light. Laser light is emitted from this device. Avoid extreme exposure. Do not point the device at anyone’s eyes.
2.4 BATTERY CHARGING
The device will need to be fully charged prior to the first use. Plug the AC recharging power cord into the unit and then into the wall socket. Charge for at least 12 hours before the first use.
Recharge the device at least once every 3 weeks whether you have used the device or not.
Put battery into the cylinder of the the charge station ( Contact PCB faces down), the green light turns on when it’s charging, the light will turn off when the battery get full charge. It’s about 2 hour to get full charge.
3. OPERATING INSTRUCTIONS
1.Push the
Power/Select Button
to power on the light.
2.Push the
Power/Select Button
to select the seconds for the procedure.
3.Push the
Light Button
to activate the Light.
4.Push the
Light Button
to stop the light.
When the light is activated,there is a “bee” tone in every 30seconds.
Note:The light will be turned off after 3 mins without any operation.
Pull out the battery to stop the power.
4.WARNINGS
•Because the device contains a laser, do not shine it directly into your eyes or look directly at the laser light. Do not point the PAD Light device at your or another person’s eyes.
• The safety of laser devices on pregnant women has not been established.
• Avoid use of the PAD Light device over, or in the area of, cancerous lesions.
• The device should not be used during the following activities:
• bathing or showering
• sleeping
• driving or operating machinery
5.MAINTENANCE
Like any electronic product, the PAD Light requires proper care and handling. The following is recommended:
• Do not drop the device or handle it roughly.
• Do not immerse the device in water or any liquid.
• If using the device on more than one person, sterilization of light rob for each use.
6.Technical Specification
Wavelength
650nm ± 5nm
Power
200mw
Diameter
18.5mm
Weight:
1100g
Length without a light rod
102mm
Magnetic Rechargeable Battery:
Lithium Ion
Diameter of the out put of the light rod
6mm
Power supply
3DV rechargeable batteries
Button control
Sound signalisation
Magnet coupled rechargeable batteries
Continuous model of the laser beam
Statement
"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid it on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item"
Seller's name: baitsramed City: Shenzhen State: Gunagdong ,China
Telephone number: 0755-88668399
The item has been cleaned and handled in accordance with the manufacturer’s instructions.
Payment
We accept PayPal and bank wire transfer. All payments must be made within 7 days after the auction ends. Non-paying bidders will be reported to eBay. Please don't buy an item if you can't/won't pay for it.
Paypal is the easiest way to pay for items on eBay. Please make sure your Paypal and eBay accounts have the same physical address used for delivery and the same e-mail address to ensure payment confirmation.Shipping: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Return
If the item you received is damaged or defective, Please tell us immidately. We will free exchange or refund.
We will pay the return shipping costs if the product is defective or the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping charges.
You can return your purchase for up to 15 days from the date of delivery. No refund will be issued if the product shows signs of use. Returned package must be in the original packaging, everything must be in new condition, No missing parts.
Our guarantee does not cover accidental damage or wear of product caused by customer.Thank you very much for your understanding!
Shipping
The goods you ordered will be posted out in the second working day after the payment has been made. (We will inform you via email if any delay occurred due to holiday events.
General shipping time is between 7-12 working days. (After the shipping started, the order will be monitored and the track of the item will be posted on paypal.
Feedback
You feedback is VERY important to us.Please leave us positive feedback, an positive feedback will be automatically left for you once we receive your full payment. Please leave us with any concerns prior to leave negative feedback, as we can only correct issues when we are aware of them. We understand the concerns and frustrations you might have, and will try our best to resolve the issues.
About  Us
Service is our #1 priority at BAISTRA!
If you tell us immediately after placing the order, we will make every effort to assist you with your change request. Unfortunately, we can not make changes or cancel an order once it has shipped.
We offer the best items at the best prices. We strive to exceed all your expectations and put a smile on your face. Your experience will be a pleasant and effortless one when you buy at BAISTRA. We stand behind our products and pride ourselves on OUTSTANDING customer service. We guarantee that you will be delighted with your purchase or we will gladly and promptly issue you a refund or make things right!
On Sep-25-20 at 15:30:07 PDT, seller added the following information:
FDA Statement
Re: K192233
Trade/Device Name: LED Curing Light
Regulation Number: 21 CFR 872.6070
Regulation Name: Ultraviolet Activator for Polymerization
Regulatory Class: Class II
Product Code: EBZ
Dated: December 7, 2019
Received: December 16, 2019