-40%
Loaded 8 space rack system for DJ Includes wireless and power amp.
$ 369.59
- Description
- Size Guide
Description
So this is going to be expensive to ship. It weighs almost 75 pounds. I estimated to ship from Indiana to California. If you live closer you can send me a zip code and I will charge the actual cost of shipping. It will be professionally packed. Local pickup is ok as well,This listing includes everything that is pictured and the 8 space Gator road case.
Shure SLX4 Wireless Receiver & Transmitter. Comes with Lavalier Mic.
Shure SLX4 Wireless Microphone System Receiver Features:
Automatic Frequency Selection
Automatic Transmitter Setup
960 Selectable frequencies across 24 MHz bandwidth
Detachable 1/4 wave antennas
Microprocessor-controlled diversity
RF presence LED
5-segment audio meter
Multi-function, backlit LCD
Low battery indicator
Frequency and power lockout
Rugged metal chassis
Volume control on rear of unit
1/2 rack design
Furnished rack hardware
Non-slip bumpers for use out of rack
Operates at 470.000-494.000 MHz
XLR and 1/4" outputs
SHURE SCM800
PRODUCT DETAILS
The Shure Model SCM800 is a full-featured, eight-channel microphone mixer for sound reinforcement, general audio recording, and audio-visual systems. Any low-impedance, balanced dynamic or condenser microphone, including a wireless microphone system, can be used with the SCM800 mixer.
Each SCM800 accepts up to eight microphone- or line–level inputs and one aux-level input (two input jacks feed the same channel). Up to four SCM800 mixers can be linked to provide up to 32 input channels. Each input channel has a two-band equalizer, switchable microphone- or line-level operation, switchable 48 V phantom power, and a 1/4-inch send/receive insert jack.
FEATURES
Compatible with Shure SCM410, SCM810 and FP410 automatic microphone mixers
Adjustable EQ per channel: low-frequency rolloff and high-frequency shelving
48 V phantom power selectable for each input
Active balanced microphone- and line-level inputs and line level output
Highly RF-resistant chassis and circuitry
LED indication of channel clipping
Linking capability for systems up to 32 microphones
Two Aux-level input jacks that feed one channel
Insert jack on each channel
Manual mixing of input channels
Internal Modification permits 230 V operation (SCM800) or 120 V operation (SCM800E)
Front-panel headphones output with level control
Peak-responding output limiter with selectable thresholds and LED indicator
DENON DN-300Z
Super-fast loading, slot-in CD player
Supports removable USB thumb and HDDs, SD/SDHC cards
Wireless audio playback from tablets and smartphones via Bluetooth
Selectable Power-On-Play mode automatically plays USB, SD or CD tracks when powered up — simply turn it on
Up to 100 foot (30m) wireless Bluetooth range
Plays CD-DA, MP3, WAV, and AAC files
3.5mm (1/8-inch) input for audio playback of any audio device with a 3.5mm output
AM/FM Tuner w/ dedicated audio out for multi-room use
RCA and balanced XLR audio outputs
10-key direct track access
Random, repeat, and single play playback modes
Remembers up to 8 Bluetooth devices for simple switching of wireless audio sources
Folder only and All play modes
Lockable front-panel keeps program material from being interrupted
IR controllable with included, compact remote
1RU chassis with removable rack ears
Detachable IEC-weighted AC inlet
100-220v switching power supply
Crown CDi 1000
Power amplifier with DSP — 500W x 2
Product highlights:
advanced protection circuitry guards against: shorted outputs, mismatched loads, general overheating and other hazards
rated for 2- 4- and 8-ohm loads and 70V and 100V output
275 watts at 8 ohms
500 watts at 4 ohms
700 watts at 2 ohms
bypassable input EQ: 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut, and adjustable shelving filters
output EQ: 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut, and adjustable shelving filters (not bypassable)
processor-controlled DC and thermal protection
output limiter prevents clipping (-3, -6, or -12 dB threshold per channel)
intuitive front-panel controls for easy configuration
backlit LCD shows speaker presets
separate LED lights for power, ready indicator, clipping and excessive temperature warning
switch-mode universal power supply
individual rotary level controls for each channel
4-position barrier strip with connectors for dual loudspeakers or bridged mono
Type B USB port allows connection to a PC for using HiQnet software
two 3-pin removable Phoenix-type connectors accept balanced line-level input signal
19"W x 3-1/2"H x 12-1/4"D
weight: 19 lbs.
MA RACKMOUNT POWER CONDITIONER.
GATOR 8 SPACE RACK.
Super-fast loading, slot-in CD player
Supports removable USB thumb and HDDs, SD/SDHC cards
Wireless audio playback from tablets and smartphones via Bluetooth
Selectable Power-On-Play mode automatically plays USB, SD or CD tracks when powered up — simply turn it on
Up to 100 foot (30m) wireless Bluetooth range
Plays CD-DA, MP3, WAV, and AAC files
3.5mm (1/8-inch) input for audio playback of any audio device with a 3.5mm output
AM/FM Tuner w/ dedicated audio out for multi-room use
RCA and balanced XLR audio outputs
10-key direct track access
Random, repeat, and single play playback modes
Remembers up to 8 Bluetooth devices for simple switching of wireless audio sources
Folder only and All play modes
Lockable front-panel keeps program material from being interrupted
IR controllable with included, compact remote
1RU chassis with removable rack ears
Detachable IEC-weighted AC inlet
100-220v switching power supply
Crown CDi 1000
Power amplifier with DSP — 500W x 2 Product highlights:
advanced protection circuitry guards against: shorted outputs, mismatched loads, general overheating and other hazards
rated for 2- 4- and 8-ohm loads and 70V and 100V output
275 watts at 8 ohms
500 watts at 4 ohms
700 watts at 2 ohms
bypassable input EQ: 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut, and adjustable shelving filters
output EQ: 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut, and adjustable shelving filters (not bypassable)
processor-controlled DC and thermal protection
output limiter prevents clipping (-3, -6, or -12 dB threshold per channel)
intuitive front-panel controls for easy configuration
backlit LCD shows speaker presets
separate LED lights for power, ready indicator, clipping and excessive temperature warning
switch-mode universal power supply
individual rotary level controls for each channel
4-position barrier strip with connectors for dual loudspeakers or bridged mono
Type B USB port allows connection to a PC for using HiQnet software
two 3-pin removable Phoenix-type connectors accept balanced line-level input signal
19"W x 3-1/2"H x 12-1/4"D
weight: 19 lb